DataDomain - Versionsgeschichte

Zovi: /* sysadmin password reset */

2020-03-23T19:45:41Z

‎sysadmin password reset

Zovi: /* sysadmin password reset */

2020-03-23T19:44:32Z

‎sysadmin password reset

Zovi: /* sysadmin password reset */

2020-03-23T19:24:47Z

‎sysadmin password reset

Zovi: /* sysadmin password reset */

2020-03-23T18:56:58Z

‎sysadmin password reset

Zovi: /* sysadmin password reset */

2020-03-23T18:45:08Z

‎sysadmin password reset

Zovi: /* if gedöns */

2020-03-17T21:53:25Z

‎if gedöns

Zovi: /* if gedöns */

2020-03-17T21:41:58Z

‎if gedöns

Zovi: /* Error adding DD in Enterprise Manager "Deleting the Local CA Certificate is Not Allowed" */

2020-03-17T21:26:18Z

‎Error adding DD in Enterprise Manager "Deleting the Local CA Certificate is Not Allowed"

Zovi: /* Active Directory Join für CIFS */

2020-03-01T18:36:16Z

‎Active Directory Join für CIFS

Zovi: /* DataDomain hintertür "schell-escape" (root shell ähnlich) */

2020-02-26T18:00:41Z

‎DataDomain hintertür "schell-escape" (root shell ähnlich)

@@ Zeile 223: / Zeile 223: @@
 : Use the following command to get the root name: cat  /proc/cmdline
 : Depending on what is returned, you will use the following to mount the device:
-:: a.If root=/dev/root-pl1, use dd_dg00p15 or dd_dg0_0p15
+::  If root=/dev/root-pl1, use dd_dg00p15 or dd_dg0_0p15
-:: b.If root=/dev/root-p2, use dd_dg00p5 or dd_dg0_0p5
+::  If root=/dev/root-p2, use dd_dg00p5 or dd_dg0_0p5
-:: c.If root=/dev/dd_dg00p15, use dd_dg00p15 or dd_dg0_0p15
+::  If root=/dev/dd_dg00p15, use dd_dg00p15 or dd_dg0_0p15
-: 15. Mount using the results from above. EXAMPLE: mount  /dev/dd_dg00p5 or /dev/dd_dg0_0p5 /sysroot
+:  Mount using the results from above. EXAMPLE: mount  /dev/dd_dg00p5 or /dev/dd_dg0_0p5 /sysroot
 :: mount /dev/dd_dg0_0p5 /sysroot
-: 16. cp /sysroot/etc/shadow /sysroot/etc/shadow.21.1.2019   to save the original file
+:  cp /sysroot/etc/shadow /sysroot/etc/shadow.21.1.2019   to save the original file
-: 16. Edit the shadow file in vi by typing : vi /sysroot/etc/shadow
+:  Edit the shadow file in vi by typing : vi /sysroot/etc/shadow
-: 17. Remove the encrypted password from the sysadmin account. The line will look something like this: “sysadmin:#3465@^fg/$GJITFD:13371:0:99999:7:::” After editing, it should look like the following:”sysadmin::13371:0:99999:7:::
+:  Remove the encrypted password from the sysadmin account. The line will look something like this: “sysadmin:#3465@^fg/$GJITFD:13371:0:99999:7:::” After editing, it should look like the following:”sysadmin::13371:0:99999:7:::
 or you can enter the following paswordhash for the password (123456):

@@ Zeile 240: / Zeile 240: @@
 : Enter :wq to save and exit the editor
 : Then enter the following commands to properly exit and reboot:
-:: a.sync; sync; sync
+::  sync; sync; sync
-:: b.cd /
+::  cd /
-:: c.umount  /sysroot
+::  umount  /sysroot
-:: d.reboot
+::  reboot
 : Once the system has rebooted, create a new password with the following command: user change password sysadmin

@@ Zeile 214: / Zeile 214: @@
 : Type “p” at the prompt and enter the following password: ddrc0s (that is a zero)
 : Select “a” to append the boot-serial option
-: add this to the kernel boot line: goto-bash console=tty0 (this is a zero)
+: add this to the end of the kernel boot line: goto-bash console=tty0 (this is a zero)
 : Hit ENTER to save the change (and then press “b” to continue booting).
 : When the reboot halts, enter the following commands

@@ Zeile 227: / Zeile 227: @@
 : 15. Mount using the results from above. EXAMPLE: mount  /dev/dd_dg00p5 or /dev/dd_dg0_0p5 /sysroot
 :: mount /dev/dd_dg0_0p5 /sysroot
 https://www.youtube.com/watch?v=ejzItYiwfhk

← Nächstältere Version		Version vom 23. März 2020, 18:45 Uhr
Zeile 208:		Zeile 208:

	== sysadmin password reset ==		== sysadmin password reset ==
		+
		+	für dd6xx
		+	:: via VGA und USB Keyboard
		+	:: Hit the TAB key at the boot screen
		+	: Type “p” at the prompt and enter the following password: ddrc0s (that is a zero)
		+	: Select “a” to append the boot-serial option
		+	: add this to the kernel boot line: goto-bash console=tty0 (this is a zero)
		+	: Hit ENTER to save the change (and then press “b” to continue booting).
		+	: When the reboot halts, enter the following commands
		+	:: mv /bin/sh x
		+	:: ln –s /bin/bash /bin/sh
		+	:: dd_bootmodule --reassemble-only
		+	: Use the following command to get the root name: cat /proc/cmdline
		+	: Depending on what is returned, you will use the following to mount the device:
		+	:: a.If root=/dev/root-pl1, use dd_dg00p15 or dd_dg0_0p15
		+	:: b.If root=/dev/root-p2, use dd_dg00p5 or dd_dg0_0p5
		+	:: c.If root=/dev/dd_dg00p15, use dd_dg00p15 or dd_dg0_0p15
		+	: 15. Mount using the results from above. EXAMPLE: mount /dev/dd_dg00p5 or /dev/dd_dg0_0p5 /sysroot
		+	:: mount /dev/dd_dg0_0p5 /sysroot
		+
	https://www.youtube.com/watch?v=ejzItYiwfhk		https://www.youtube.com/watch?v=ejzItYiwfhk

← Nächstältere Version		Version vom 17. März 2020, 21:53 Uhr
Zeile 1.031:		Zeile 1.031:
	eth3 eth3b		eth3 eth3b
	!!!! DDdicki01 YOUR DATA IS IN DANGER !!!! #		!!!! DDdicki01 YOUR DATA IS IN DANGER !!!! #
		+
		+
		+	dd ethtool:
		+
		+	/ddr/bin/ethtool_asup.sh

← Nächstältere Version		Version vom 17. März 2020, 21:41 Uhr
Zeile 1.022:		Zeile 1.022:
	/proc/sys/net/ipv4/conf/veth3.3		/proc/sys/net/ipv4/conf/veth3.3
	/proc/sys/net/ipv4/neigh/veth3.3		/proc/sys/net/ipv4/neigh/veth3.3
		+
		+
		+	eth translations:
		+	!!!! DDdicki01 YOUR DATA IS IN DANGER !!!! # cat /ddr/.dd_port_name_translations
		+	eth0 eth0a
		+	eth1 eth0b
		+	eth2 eth3a
		+	eth3 eth3b
		+	!!!! DDdicki01 YOUR DATA IS IN DANGER !!!! #

← Nächstältere Version		Version vom 17. März 2020, 21:26 Uhr
Zeile 993:		Zeile 993:
	exit		exit
	priv set admin		priv set admin
		+
		+	=== if gedöns ===
		+
		+	root mode
		+
		+	HW Network card show:
		+	lspci \| egrep -i --color 'network\|ethernet'
		+
		+	cardports show not listet IFs:
		+	ifconfig
		+	or
		+	ip a
		+
		+	bring up the not shown IFs:
		+	# ip link set dev <interface> up
		+	# ip link set dev <interface> down
		+	or
		+	# /sbin/ifconfig <interface> up
		+	# /sbin/ifconfig <interface> down
		+
		+	show device if really up:
		+	ethtool ifb0
		+
		+	evt configs:
		+	cat /sys/class/net/ifb0/
		+	cat /sys/devices/virtual/net/ifb0/
		+
		+	/proc/sys/net/ipv4/conf/veth3.3
		+	/proc/sys/net/ipv4/neigh/veth3.3

← Nächstältere Version		Version vom 1. März 2020, 18:36 Uhr
Zeile 935:		Zeile 935:

	[[Datei:DD_join.PNG]] [[Datei:DD_join2.PNG]]		[[Datei:DD_join.PNG]] [[Datei:DD_join2.PNG]]
		+
		+
		+
		+	<br><br>
		+	----
		+	== Error adding DD in Enterprise Manager "Deleting the Local CA Certificate is Not Allowed" ==
		+	There are two methods to resolve this issue:
		+
		+	Method 1
		+
		+	1.Return the hostname back to the original hostname.
		+	2.Remove the trust for that hostname.
		+	3.Change the hostname to the desired new name.
		+	4.Add the Data Domain system.
		+
		+
		+	Method 2
		+
		+	The other method requires assistance from Data Domain support. If you need or want to keep the new hostname, please open a case and
		+	support will be happy to assist you.
		+
		+	Connect to the Data Domain system using the Command Line Interface (CLI) 180649 .
		+	Enable SE Menu 181582 (Level 40 article=only for employess and partners)
		+	Go to BASH 180719 (Level 50 article)
		+	Move the old certificate directories to a backup folder within BASH. At the BASH prompt, type the following commands in succession:
		+	cd /root/certs
		+	mkdir oldcerts
		+	NOTE: If the mkdir fails, then likely this procedure was done before and you either need to clear the existing oldcerts directory
		+	or create a newer oldcerts directory.
		+
		+	mv CA host trustedCA oldcerts/
		+	NOTE: If the move fails, then the oldcerts directory already had info in it, so create a new oldcerts_ directory and mv the certificate directories to it.
		+	EXAMPLE: "mv CA host trustedCA oldcerts_2015_07_15/"
		+
		+	Confirm that the CA host trustedCA directories are not in /root/certs with an ls -l
		+	!!! MYHOSTNAME YOUR DATA IS IN DANGER !!!! # ls -l
		+
		+	total 4
		+	drwxr-xr-x 4 root root 4096 Jul 15 07:01 oldcerts
		+
		+	Enable the DD OS command line from within BASH.
		+	ddsh -s
		+	Generate a new Local CA certificate from SE mode 181582 (Level 40 artilce=only for Employees and Partners)
		+	adminaccess certificate generate
		+
		+	NOTE: In DD OS 5.3 or later, the certificate generate command changed slightly and you have to use the following.
		+	adminaccess certificate generate self-signed-cert
		+	Verify if the new Local CA certificate has been created with the correct hostname.
		+	adminaccess certificate show ca
		+	adminaccess certificate show host
		+	Exit the DD OS command line, returning to the BASH prompt.
		+	exit
		+	Verify if the new certificate has been created within BASH.
		+	ls -la
		+	Look for CA, host, and trusted CA certificate with the current date.
		+	Enable to DD OS command line.
		+	exit
		+	priv set admin

@@ Zeile 695: / Zeile 695: @@
 wenn Du wirklich weisst was tu tust....dann hier der Weg dazu:
 * uname
 * fi st
@@ Zeile 717: / Zeile 723: @@
   *************************************************************************
   !!!! vddmc1 YOUR DATA IS IN DANGER !!!! #
 == Meldung "filesys Verify Status Data verification is suspended" ==